 |
 GRIPPING FIXTURES |
WEDGE GRIPS |
| |
 |
5/16" WEDGE GRIP
200 LB CAPACITY
|
| Spring loaded grip, steel/aluminum construction, self-tightening
jaw automatically closes on specimen. Finger tabs
open the wedges for quick insertion and release. Serrated
wedge faces hold specimen firmly; 5/16" jaw width, 1/8"
maximum opening between wedges. Throat depth: 1".
Overall length: 2 3/8" [60 mm]. Weight: 3 oz [85 g]. |
| Model |
Description |
Price |
| GP50 |
Single Grip |
$220.00 |
| |
Set of Two Grips |
$396.00 |
|
|
 |
1/4" LIGHT WEDGE GRIP
100 LB LOAD CAPACITY
|
| Miniature spring loaded grip, steel/aluminum construction,
self-tightening jaw automatically closes on specimen. Finger
tab opens the wedges for quick insertion and release.
Serrated wedge faces hold specimen firmly; 3/16" jaw width,
1/8" maximum opening between wedges. Throat depth: 5/8".
Overall length: 2 1/2" [62 mm]. Weight: 1 oz [28 g]. |
| Model |
Description |
Price |
| GP60 |
Single Grip |
$198.00 |
| |
Set of Two Grips |
$356.00 |
|
|
 |
1" WEDGE GRIP
2000 LBF CAPACITY
|
| Spring loaded grip, all-steel construction, self-tightening
jaw automatically closes on specimen, lever operated
wedges for quick insertion and release. Serrated wedge
faces hold specimen firmly. 1" [25 mm] jaw width, 3/8"
[9.5 mm] maximum opening between wedges. Overall
length: 3 1/2" [89 mm]. Weight: 14 oz. [397 g]. |
| Model |
Description |
Price |
| GP1012 |
Single Grip |
$425.00 |
|
|
 |
3/4" FLAT CHUCK GRIP
100 LB CAPACITY
|
| Wing screws adjust grip faces. 3/4" wide grip faces with textured
surfaces tighten separately on sample. 3/4" maximum
opening between faces. 3/4" throat depth. Overall length: 2"
[50 mm]. Weight: 6 oz [170 g]. |
| Model |
Description |
Price |
| GP10 |
Single Grip |
$190.00 |
| |
Set of Two Grips |
$342.00 |
|
|
| |
|
GRIPPING FIXTURES |
RIBBON, FILAMENT & FINE POINT GRIPS |
| |
 |
1" RIBBON GRIP
100 LB CAPACITY
|
| Wide grips with smooth bottom face and serrated top
face for grasping film or ribbon specimens. Thumb screw
tightens grip on sample. 5/16" maximum opening between
faces. Throat depth: 1/2". Overall length: 2 1/2" [65 mm].
Weight: 4 oz [113 g]. |
| Model |
Description |
Price |
| GP90-1 |
Single 1" Grip |
$160.00 |
| |
Set of Two Grips |
$290.00 |
|
|
 |
RIBBON GRIPS
100 LBF CAPACITY
|
| Wide grips in three widths, 3", 5" and 7", with serrated faces
for grasping thin film, paper, plastic specimens. Thumbscrew
tightens to firmly grip specimens to 0.5" [12.7 mm] thick.
Overall length: 3" [76 mm]. |
| Model |
Description |
Price |
| GP1015-1 |
3" Width Single Grip/10 oz (272 g) |
$310.00 |
| GP1015-2 |
5" Width Single Grip/11 oz (318 g) |
$330.00 |
| GP1015-3 |
7" Width Single Grip/13 oz (364 g) |
$350.00 |
|
|
 |
FILAMENT FIXTURE
50 LB CAPACITY
|
| Precision aluminum fixtures for testing filament or fine wire
up to 1/32" diameter without damaging specimen. Fixtures
swivel as load is applied for proper alignment of specimen.
Thumb screw tightens clamp to hold loose end. Overall
length: 2" [50 mm]. Weight: .1 oz [28 g]. |
| Model |
Description |
Price |
| GP140 |
Single Grip |
$120.00 |
| |
Set of Two Grips |
$220.00 |
|
|
 |
1/16" FINE POINT GRIP
30 LB CAPACITY
|
| Slender narrow faced grip for testing fine wire, ribbon, etc.
Excellent for tight access, such as crowded circuit boards.
Thumbscrew tightens grip on sample; 1/16" jaw width;
1/16" maximum opening between jaw faces. Throat depth:
3/8". Overall length: 1 7/8" [43 mm]. Weight: 1 oz [28 g]. |
| Model |
Description |
Price |
| GP70 |
Single Grip |
$98.00 |
| |
Set of Two Grips |
$176.00 |
|
|
| |
|
GRIPPING FIXTURES |
PIN VISES & WIRE TERMINAL GRIPS |
| |
 |
WIRE TERMINAL TEST GRIP
250 LBF CAPACITY
|
| Tests breaking strength of wire terminal connections. Thumbscrew adjusts width of slotted gap to accomodate wire diameters to 0.375" (9.5 mm). Three sizes available for various size wires. Overall length: 3.4" (86 mm). Weight: 5 oz (142 g). |
| Model |
Description |
Price |
| GP1001-0 |
Wire sizes 0-0.125" (0-3.2 mm) |
$230.00 |
| GP1001-1 |
Wire sizes 0.125"-0.250" (3.2-6.4 mm) |
$230.00 |
| GP1001-2 |
Wire sizes 0.250"-0.375" (6.4-9.5 mm) |
$230.00 |
|
|
 |
DUAL CAM GRIP
200 LBF CAPACITY
|
| Spring actuated and fixed serrated cams with open end for easy insertion of wire or other specimens to 0.250" thick and 0.500" wide. Lever activated cam for quick insertion and release of specimen. Distance to cam engagement point: 0.4" (10 mm). Overall length: 2" (51 mm). Weight: 3 oz (85 g). |
| Model |
Description |
Price |
| GP1002 |
Single Grip |
$180.00 |
|
|
 |
SMALL PIN VISE
25 LB CAPACITY
|
| Miniature grip for circular specimen testing. From 0" to 0.05" O.D. Overall length: 1 3/4" [45 mm].
Weight: .2 oz [6 g]. |
| Model |
Description |
Price |
| GP20 |
Small Pin Vise |
$48.00 |
| |
Set of Two Grips |
$86.00 |
|
|
 |
1/4" PIN VISE
100 LB CAPACITY
|
| Chuck grip for circular specimen testing from 0.03" to 0.25" O.D. Overall length: 2 5/8" [65 mm].
Weight: 4 oz [113 g]. |
| Model |
Description |
Price |
| GP30 |
Single Grip |
$48.00 |
| |
Set of Two Grips |
$86.00 |
|
|
| |
| Prices and specifications are subject to change without notice. |
www.wagnerinstruments.com |
|
| |
| CALL TOLL FREE: 800 345-4188 |  |
|
| |
Wagner Instruments • Greenwich CT • 203-698-9681 • Fax: 203-698-9696 • sales@wagnerinstruments.com |
