Wagner Instruments force measurement gages; door testing, spring testing, pull testing, push testing, crane scales, and more

please call to order
Print  
MOTORIZED FORCE TEST STAND   CHATILLON TCD 200 DIGITAL FORCE TEST STAND
CAPACITIES: 200 lbf / 100 kgf / 1000 N
FORCE TEST FTK 100

  • TENSION & COMPRESSION
  • CAPACITY: 200 lbf / 100 kgf / 1000 N
  • FORCE & DEFLECTION TESTING
  • UP-FRONT KEYPAD & LCD DISPLAYS
  • DUAL-DISPLAY - FORCE, TRAVEL & SPEED
  • MANUAL OR PROGRAMMED OPERATION
  • FORCE & TRAVEL DATA OUTPUT
  • REMOTE COMPUTER CONTROL
  • AUTOMATIC CYCLING
  • MATERIAL TESTING & FORCE ANALYSIS
  • OVERLOAD PROTECTION - FORCE LIMITS
  • ADVANCED DFS FORCE GAUGE
  • TCD 200 AND DFS FORCE GAUGE: $7125


CONSTRUCTION

  • Rugged all metal construction.
  • Horizontal clearance: 2-1/4'' [60 mm].
  • Vertical travel: 18'' [460 mm].
  • Five variable speeds: 0.5 to 12.5in/min standard.
  • Speed, deflection, units, cycles and limits displays.
  • Up-front keypad and 0.5'' dual LCD displays.
  • Force display and controls on force gauge.
  • Ball screw drive for precise linear motion.
  • Dynamic braking for controlled stops.
  • Standard mounting for Chatillon force gauges.

OPERATION

  • Manual or programmed operation.
  • Up-front keypad or remote computer control.
  • Send force and deflection at keyboard or computer.
  • Up and down at selected speed.
  • Maximum and minimum speed selection.
  • Mechanical high and low travel limits.
  • Cycling between upper and lower limits to 1000.
  • High and low force limits set at force gauge.
  • Material testing and force analysis software.

DATA OUTPUT

  • Bi-directional RS232 outputs: force and deflection.
  • Analog outputs: force and deflection.

POWER REQUIREMENTS

  • 110 Vac / 220 Vac operation

ACCESSORIES

  • Optional: Mounting adapters, cables, software and grips.

ACCURACY

  • Force ± 0.1% of full scale.
  • Deflection greater of ± 0.1% of Reading of ± 0.004''.
  • Speed: ± 5% of full scale.

WEIGHT AND DIMENSIONS

  • 42 lb [19 kg]
  • 35'' [900 mm] H x 14'' [350 mm] W x 16'' [400 mm] D.
Chatillon TCD

The TCD 200 is an advanced motoroized force tester featuring the DFS Force Gauge and front panel control of tension and compression testing with digital force, travel and speed displays.

The DFS Force Gauge displays force while travel and speed are displayed on two up-front LCD panels. Programming of test speed, high and low travel setpoints, cycling and other basic functions is done at the keypad.

Using the DFS Force Gauge, force setpoints are programmed to stop or to cycle the TCD 200 between the setpoints.

External control of the DFS Force Gauge and the TCD 200 is provided with bi-directional RS232 from a computer keypad. Optional Nexygen material testing and force analysis software provides data logging and graphing of force and travel.

MODEL DESCRIPTION PRICE
TCD 200-STD Standard Speed - 0.5 to 12.5 in/min $7125*
TCD 200-SS Slow Speed - 0.02 to 0.5 in/min $7125*
TCD 200-MS Medium Speed - 0.1 to 2.5 in/min $7125*
TCD 200-MH Medium High Speed - 1.0 to 25.0 in/min $7125*
TCD 200-HS High Speed - 2.0 to 50.0 in/min $7125*
* Includes one DFS Force Gauge of any capacity, NC000647 Cable and
Nexygen DF Gauge Software
MODEL DFS DIGITAL FORCE GAUGE PRICE
DFS-002 2 x 0.0002 lbf 1 x 0.0001 kgf $1457*
DFS-010 10 x 0.001 lbf 5 x 0.0005 kgf $1457*
DFS-025 25 x 0.002 lbf 10 x 0.001 kgf $1457*
DFS-050 50 x 0.005 lbf 25 x 0.002 kgf $1457*
DFS-100 100 x 0.01 lbf 50 x 0.005 kgf $1457*
DFS-200 200 x 0.02 lbf 100 x 0.01 kgf $1457*
* One DFS Digital Force Gauge of any capacity is included with each TCD 200.
MODEL OPTIONAL ACCESSORIES PRICE
NC000647 Cable - DFS to TCD (9 pin) - 6' $195*
NC000875 Cable - DFS to PC (9 pin) - 9' $55
NC0002868 Software - Nexygen TCD $895
* Included with each TCD 200, the NC000647 Cable provides force gauge overload protection and test stand interface.

 

 
  Prices and specifications are subject to change without notice. www.wagnerinstruments.com
 
 CALL TOLL FREE: 800 345-4188Credit Cards
    Wagner Instruments • Greenwich CT • 203-698-9681 • Fax: 203-698-9696 • sales@wagnerinstruments.com